QUALITY
Search Our Site    |   e-mail us: orders@osborneleathertools.com     |     View Cart     |     Check Out
Osborne Leather Tools L.L.C. - Excellence in Manufacturing since 1826
Leatherworking tools by C.S. Osborne
Home Company Info. Terms Contact Us
 
Rivets & Eyelet Setters
 
Click on image to zoom
No. 170 - Rivet Setter (larger sizes)

Drop forged, polished face.

 
No. 170 - Farmers Rivet Setter 
Osborne NumberDiameter of hole (inches)Copper RivetRivet Shank Diameter (inches)Weight each (oz)Unit of MeasureUPC No.Price ($)Qty.
170-80.1918.1815EA6725225.50
170-90.1719.1615EA6725425.50
170-100.16110.1515EA6725625.50
 

 

  Notes: Choose the setter with a hole diameter slightly larger than the rivet being set. Use the table provided to determine proper size of #169 Rivet Setter. Push the rivet through the hole and then turn the material over. Place burr on rivet, then use the rivet setting tool's straight hole to drive the burr down against the material. Cut the rivet off close to the burr with side or end nippers. Do not cut off flush with the burr, but leave 1/16" above the burr. The hole on the side of the rivet setter can be used to dislodge any waste that is wedged into the tool. Place the concave recess of the setter on the burr. Hold perpendicular and strike the tool forcefully, turning to the left anfd right as you strike it. This spreads the end of the rivet over the burr and rounds the end. A few extra blows from a soft face mallet can be used to flatten the rivet end if desired.
   
   
Home| Company Info.| Terms| Contact Us
Osborne Leather Tools L.L.C. Copyright . 2008